Skip to main content

CYAGO is a company that specialises in drying and blowing technology.  Drying of products, drying of reusable drinking cups, blowing plastic pellets off trucks so they do not end up on the road and in watercourses, removing dust from workers in factories in a safe way.


Let your drying or blowing needs become our goal.  Dedication, diligence and passion are synonymous with our ‘YOBO’ spirit.  We have the expertise you would expect from a company in this industry.  Your smile is our motivation.  We would like to welcome you to CYAGO.

 

Mission and values

At CYAGO we believe in high-performing drying and blowing solutions to help the industrial world reach the Sustainable Development Goals. We integrate our Ronair drying technology into turn-key applications for your industrial processes. Next to Ronair, our expertise ranges from personal cleaning equipment to large scale blowing installations.

Our values :

  • ‘YOBO’
  • dedication, passion and zeal
  • sustainability

 

yobo-spirit: 'You Only Blow Once'

'You Only Blow Once'

Our slogan is: “You only blow once”.  Everything happens in that one short passage.  YOBO’ symbolises the dedication, the zeal and the passion to optimally dry or blow the product in just one step. First time lucky!  In doing so, we minimise energy consumption and noise, and strive for maximum efficiency.  Your smile/ is our motivation .   Welcome.

A bit of history

CYAGO NV saw the light of day at the beginning of 2021.  However, our company has a much longer history and a great deal of expertise.  After all, the company is a business unit that originated from Almeco NV (Moeskroen), a division that began back in 2001.

 

  • 2001: Almeco NV takes on the representation of Air Control Industries (ACI), an experienced player in drying and blowing systems.
  • 2006: Almeco NV establishes the Business Unit Drying Systems, the birth of an independent team.
  • 2015: The brand name RONAIR® is launched, a high-end total solution for drying and blowing all kinds of products.
  • 2021:
    • The Drying Systems Business Unit spins off into a new company: CYAGO NV.
    • We take the RONAIR® technology with us and immediately develop two new brands.  DRYCUP® is our solution for drying reusable drinking cups.
    • OCTRON® is for our larger installations that blow plastic pellets off trucks.

 

 

Automotive industry - Food and beverage industry - Chemical, petrochemical and pharmaceutical industry - Steel industry - Glass industry - Plastic industry - ...

Our customers are leading companies in a wide range of industries

In addition, machine builders, installers and engineering offices regularly rely on us for the most diverse projects

Our brands, your solutions

Our method

The customer is looking for a drying solution for his product

1. The customer is looking for a drying solution for his product

Our client is a manufacturer of products that get wet during the production process. The water droplets cause problems, for example, with labelling, packaging or during camera inspection of the products.

Collecting parameters

2. Collecting parameters

During the first meeting  with the customer, we make an overview of all of the important parameters, such as type of product, the speed of the conveyor belt, noise requirements, any adjustment possibilities, etc.

Performing lab tests

3. Performing laboratory tests

In our specialised lab, we carry out drying tests on product samples sent by the customer. Based on the results, we compile a test report.
 

Analysis with the customer

4. Analysis with the customer

Based on the test report, the customer evaluates the results. We then invite the customer to carry out new tests to validate the test protocol and the quality of the results. We undertake to supply an installation with the same degree of efficiency (or drying rate) in real operating conditions at full capacity.

Development of the drying solution

5. Development of the drying solution

The principle of the drying solution is developed with the help of sketches and diagrams. During this step, we also make a rough estimate of the budget and everything is discussed with the client. Adjusting the technical and/or commercial specifications is a process that is repeated as often and for as long as necessary.

Engineering

6. Engineering

Engineering starts after receiving the official order from the customer and their approval of the schematic representation of the solution. We then compile all the technical details and, if necessary, carry out additional drying tests. The technical drawings are submitted to the customer for final approval.

Production and assembly

7. Production and assembly

Production is started after official and final approval of the technical drawings by the customer. Next, the assembly and quality control of the installation takes place at the CYAGO site in Kortrijk. At the request of the customer, the FAT (Factory Acceptance Test) can also be carried out at our site.

On site installation

8. On-site installation

We deliver the machine to the client's site and proceed with the installation. We ensure that the customer has all the necessary information and remain present during the start-up.

Contact us if you would like us to perform drying tests on your product.

Team

Troika Callewaert

Troika Callewaert

Johan Wyckaert

Johan Wyckaert

"Dream big, start small. But most of all, start."

Thibault Castel

Thibault Castel

"Open minds lead to open doors."

Andy Trappeniers

Andy Trappeniers

"The best times are meal times"

Stefaan De Clercq

Stefaan De Clercq

Sander Minne

Sander Minne

Guillaume Huyzentruyt

Guillaume Huyzentruyt

Tim Minjauw

Tim Minjauw

"Testing is knowing!"

Lucas De Vlieghere

Lucas De Vlieghere

"Smile as long as you live, because you live as long as you smile."

Lieven De Clercq

Lieven De Clercq

Benoit Stauven

Benoit Strauven

"It doesn't have to be lonely at the top."

What is your life motto ?